The five-sided machining center integrates the functions of a vertical machining center and a horizontal machining center. The five-sided machining center can complete all side and top surface processing after clamping the workpiece at a time, except for the mounting surface. The five-sided machi...

Because the outer cover itself is not allowed to have defects such as tiny convex hulls, pits, small wrinkles, cracks, etc., this kind of parts requires high surface quality and good profile dimensional accuracy. Therefore, mold surface processing should be guaranteed from two aspects: smoothness...

1. First determine the process requirements of the parts, the batch of processed workpieces, and prepare for the functions of the CNC lathe. The prerequisites for the reasonable selection of the CNC lathe meet the process requirements of the typical parts. The process requirements of the typical ...

  With the rapid development of high-tech and independent innovation, the application of CNC machining is becoming increasingly common. So, what are the common CNC machining methods?

The normal use of CNC lathes must meet the following conditions: the power supply voltage fluctuation at the locations of the machine tool is small, the ambient temperature is less than 30 degrees Celsius, and the relative temperature is less than 80%. Generally, CNC lathes are installed in machin...